Threaded Pipe Flange Manufacturer
Some piping runs cannot take a weld. Hot work in an operating plant, lines near flammable or explosive atmospheres, and small-bore utility piping that has to come apart for maintenance all call for a joint that goes together with a wrench instead of a torch.
MFC Flange manufactures threaded pipe flanges for exactly those lines, forging, machining, and heat treating every flange at our ISO 9001:2015-certified plant in Sealy, Texas.
Send us your material grade, size, and pressure class to start a quote.
How Threaded Pipe Flanges Work
A threaded flange has internal taper pipe threads machined into the bore. The pipe with matching external threads screws directly into the flange, and thread sealant or tape seals the threaded joint, while a gasket seals the flange face. Because the connection is mechanically assembled, there is no welding, no post-weld inspection, and no hot work permit.
Threaded pipe flanges are a common choice for:
- Areas where welding is restricted or hazardous, such as near flammable or explosive atmospheres
- Small-diameter utility lines carrying air, water, and other low-pressure services
- Instrument and sampling connections
- Systems that need frequent assembly and disassembly for maintenance
Threaded joints are not the right fit for every line. Thermal cycling, vibration, and bending loads can work threads loose over time, so engineers typically move to a butt-welded weld neck flange for high-temperature, high-pressure, or cyclic service. Where welding is allowed and pressure is lower, a slip-on flange is another option. Some specifications also call for a seal weld over the threads to back up the mechanical joint.
Threaded Flange Specifications
|
Specification |
Range |
|
Standard |
ASME B16.5; DIN EN 1092 for international projects |
|
Threads |
NPT taper pipe threads per ASME B1.20.1 |
|
Pressure class |
Class 150 through Class 2500 |
|
Facing |
Raised Face (RF), Flat Face (FF) |
|
Materials |
Stainless steel, duplex, nickel alloy, and chrome moly grades |
|
Certification |
ISO 9001:2015, PED 2014/68/EU |
|
Domestic content |
100% DFARS compliant; AIS and BABA ready |
Request A Quote
Send us the size, pressure class, facing, material grade, and thread specification, along with quantity and required date. Our team will review the spec and respond with pricing and lead time. To talk through a drawing or a material substitution first, call 979-541-1767, email sales@mfcflange.com, or contact our team.
Threaded Flange Materials
Our domestic, DFARS-compliant inventory covers more than 40 material grades, so a forging run can start without waiting on an outside mill.
Stainless Steel Threaded Pipe Flanges
Stainless steel threaded pipe flanges are the standard pick for water, chemical, food and beverage, and oil and gas service where corrosion resistance matters. We forge 304/H, 304/L, 310/H, 316/H, 316/L, 317/L, 321/H, and 347/H. Stainless threads can gall during makeup, so many specs call for a compatible anti-seize or thread sealant. See our stainless steel flanges page for grade details.
Duplex Threaded Flanges
Duplex threaded flanges combine high strength with strong resistance to chloride stress corrosion cracking, which suits offshore, marine, and chemical lines. We produce F44, F51/60, F61, and super duplex F53 and F55.
Nickel Alloy Threaded Flanges
When stainless steel cannot handle corrosion or temperature, nickel-alloy threaded flanges step in. Grades include Hastelloy C276 and C22, Inconel 625, Monel 400, Nickel 200/201, and Alloys 20, 600, 601, 800/H/HT, and 825, which withstand hydrochloric acid and high-pressure oxidizers in defense, power generation, and petrochemical service.
Chrome Moly Threaded Flanges
Chrome moly threaded flanges in A182 F5, F9, F11, F22, and F91 provide high-temperature strength and corrosion resistance for power generation and refining systems.
Raised Face Threaded Flanges and Flat Face Options
Raised face threaded flanges are the most common configuration in process piping. The raised sealing surface concentrates bolt load on the gasket for a tighter seal. Flat face construction is specified when the mating valve, pump, or flange is itself flat-faced, which is common on cast iron equipment, where bolting a raised face against a brittle flat face can crack the mating part. If your drawing does not call out a face type, confirm it against the mating component before you order.
Why Engineers Choose MFC Flange as Their Threaded Flange Manufacturer
Piping engineers and procurement teams get one accountable source for every threaded flange on the bill of materials.
- One Facility, Full Control: Open-die and closed-die forging on 300 to 1,000 ton presses, with machining, heat treating, and testing in the same plant.
- Verified Before It Ships: Factory acceptance testing and positive material identification on every flange, plus chemical analysis, tensile, hardness, Charpy impact, and non-destructive evaluation.
- Domestic and Compliant: Made in Sealy, Texas, with DFARS-compliant material, AIS and BABA readiness, approval on nearly all major Approved Manufacturer Lists, and Canadian Registration Numbers across multiple provinces.
- Any Quantity, On Your Schedule: Made to order from a single replacement flange to a full stocking program, with expedited production available for urgent orders.
Our threaded flanges go into piping systems across oil and gas, chemical, petrochemical, power generation, marine, and defense. See the full list on our industries page.
Frequently Asked Questions
What are threaded pipe flanges used for?
Threaded pipe flanges connect threaded pipe to valves, equipment, or other pipe without welding. They are common on small-diameter, lower-pressure lines, in areas where welding is restricted, and on systems that need to be taken apart for maintenance.
What is the difference between a threaded flange and a socket weld flange?
A threaded flange screws onto pipe with external threads and needs no welding. A socket weld flange accepts the pipe into a recessed bore and is joined with a fillet weld, which makes it the stronger choice for higher-pressure small-bore lines where welding is permitted.
What materials does MFC Flange use for threaded flanges?
MFC Flange manufactures threaded flanges in 300 Series stainless steel, duplex and super duplex, nickel alloys including Hastelloy, Inconel, and Monel, and chrome moly grades A182 F5, F9, F11, F22, and F91.
Can I order threaded flanges in small or large quantities?
Yes. MFC Flange makes flanges to order in accordance with industry and customer specifications, in any quantity. Lead time depends on grade, size, and pressure class, so send your specs to confirm a delivery date.